sanyarollerbearing https://www.sanyabearing.com/product/pillow-block-bearings/stainless-steel-cast-iron-pillow-block-units-ucfl-series.html Pillow Block Units AISI 440C Material: Higher resistance to rust and corrosion than 52100 chrome bearing steel, Please note that AISI 440C will have magnetic properties.
Chemical Composition: C:0.95-1.20, Si?1.00?Mn?1.00, P?0.04, S?0.03, Cr:16.0-18.0,Mo:?0.75
AISI 304 Material:
AISI 304 stainless steel, widely used as corrosion- and heat-resistant steel and also as nonmagnetic steel, is most suitable in corrosive environments where AISI 440C stainless steel can not be used.
Chemical Composition: C?0.08, Si?0.75?Mn?2.00, P?0.045, S?0.03, Cr:18.0-20.0,Mo:8.0-10.5?Ni?0.10
AISI 316L Material:
316L stainless which provides superior corrosion resistance when compared to conventional steel and 440 stainless bearings.
316L Stainless is the standard molybdenum-bearing stainless steel. The molybdenum gives 316 better overall corrosion resistant properties than Grade 304, particularly higher resistance to pitting and crevice corrosion in chloride environments.
Chemical Composition: C?0.03, Si?1.00?Mn?2.00, P?0.045, S?0.03, Cr:16.0-18.0,Mo:2.0-3.0, Ni:10.0-14.0
Packing
Tube packing, single box packing or other industrial packing are all available.Special requirements should be mentioned in the order
Pillow Block Units AISI 440C Material:
Higher resistance to rust and corrosion than 52100 chrome bearing steel, Please note that AISI 440C will have magnetic properties.
Chemical Composition: C:0.95-1.20, Si?1.00?Mn?1.00, P?0.04, S?0.03, Cr:16.0-18.0,Mo:?0.75
AISI 304 Material:
AISI 304 stainless steel, widely used as corrosion- and heat-resistant steel and also as nonmagnetic steel, is most suitable in corrosive environments where
AISI 440C stainless steel can not be used.
Chemical Composition: C?0.08, Si?0.75?Mn?2.00, P?0.045, S?0.03, Cr:18.0-20.0,Mo:8.0-10.5?Ni?0.10
AISI 316L Material:
316L stainless which provides superior corrosion resistance when compared to conventional steel and 440 stainless bearings.
316L Stainless is the standard molybdenum-bearing stainless steel. The molybdenum gives 316 better overall corrosion resistant properties than Grade 304,
particularly higher resistance to pitting and crevice corrosion in chloride environments.
Chemical Composition: C?0.03, Si?1.00?Mn?2.00, P?0.045, S?0.03, Cr:16.0-18.0,Mo:2.0-3.0, Ni:10.0-14.0
Packing
Tube packing, single box packing or other industrial packing are all available.Special requirements should be mentioned in the order
Our own NSJ package is as below